Taps, toilets & showers
The short answer
Repair or replace fixtures
- Price from
- £80.00
- Time on site
- 1 to 3 hours
What you get
A fully functional and leak-free tap, toilet, or shower, repaired or replaced by a qualified plumber.
When do you need a Taps, toilets & showers?
You should book a plumber if you spot drips or your water bills suddenly rise.
- Fix toilets that will not flush properly.
- Stop showers from losing water pressure.
- Meet legal duties to keep rental homes safe.
- Update old taps to save water.
- Prevent damp and mould from hidden leaks.
- Check plumbing before you sell your home.
As a guide, small repairs might cost around £40 to £90 per hour.
What happens on the day
A plumber will start by checking your stopcock to turn off the water safely.
- Inspect the toilet cistern or shower valves.
- Carry out repairs with new washers or seals.
- Remove old fixtures to fit new ones.
- Check all pipework for signs of rust.
- Test every new part under full pressure.
- Ensure the hot and cold water flows.
Most visits take between one and three hours.
How to prepare
- Clear the space under your kitchen sink
- Empty items from the bathroom floor
- Identify where your main stopcock is
- Remove any cleaning products near the toilet
- Clear a path to the water tank
- Put away towels and bath mats
- Check you have the new parts ready
- Keep pets in a different room
How to improve your result
- Choose ceramic disc taps for longer life
- Fit a dual flush to save water
- Install a thermostatic valve for safer showers
- Fix small drips before they cause damp
- Use a limescale remover in hard water
- Check your visible pipework for green spots
Why it is useful day to day
Having reliable plumbing makes your daily routine much smoother and less stressful.
- Lower your monthly water and energy bills.
- Stop the sound of dripping taps at night.
- Prevent expensive floor and ceiling repairs.
- Keep your bathroom hygienic for the family.
- Boost the value of your property.
- Enjoy a better shower every single morning.
Why we ask these questions
Your plumber will check your water system to see which products fit your home.
- Confirm your home has enough water pressure.
- Explain if your boiler supports power showers.
- Check that waste pipes are draining well.
- Make sure new taps follow safety rules.
- Find the cause of any strange noises.
Professional advice helps you choose the right taps and toilets for your budget.
Frequently asked questions
Often needed alongside
- Fixed price
Drain camera survey
CCTV inspection of drains
- Urgent
Leak find & fix
Trace and repair leaks
- Urgent
Blocked drain, sink or toilet
Clear blockages
Water pressure & pumps
Pumps, mains pipe, low pressure
Drain repair & relining
No-dig relining, collapsed pipes
- Recurring
Septic tank & treatment plant
Empty, repair, replace

